Impact Window Prices in Coral Gables, FL: Verified Tables for Mediterranean Revival Homes, Waterfront Estates and Ponce Condos
Impact windows in Coral Gables, FL cost what the type, size and glass cost, plus what the city's design review adds, and every unit must meet Miami-Dade's 175 mph HVHZ design wind speed. The tables below show verified, product-only ESW and Mr. Glass prices by size, with scenarios built on Coral Gables homes and condos.
Prices checked November 19, 2026 · WSM factory-pricing Worker v2 (same engine as the online configurator), visitor pricing, product only. Verified product-only prices, before tax, installation, permit and delivery. A written quote confirms your final price.
Coral Gables projects, priced
1920s-1940s Mediterranean Revival house (Granada / Country Club Section style)
A two-story house from the city's first decades, priced on the openings it already has: tall single-hung windows, small bath and stair windows, one picture window and a rear patio slider. Casements, arched tops, design conditions and custom sizes are quoted separately after design and historic review.
- 10 × Single hung 36" × 60"
- 4 × Single hung 24" × 36"
- 1 × Fixed / picture window 36" × 36"
- 1 × Sliding glass door (XO) 72" × 80"
- ESW total (Verified)
- $12,005.68
- Mr. Glass total (Verified)
- $12,414.86
Total for all 16 openings · product only, before tax, installation and permit
1950s-1960s one-story house (Riviera sections style)
A post-war block house from the city's biggest building decades: single-hung bedroom windows, two wide living-room rollers and one patio slider. Board of Architects drawings and installation are not included.
- 8 × Single hung 36" × 48"
- 2 × Horizontal roller (XO) 60" × 36"
- 1 × Sliding glass door (XO) 96" × 80"
- ESW total (Verified)
- $9,519.20
- Mr. Glass total (Verified)
- $9,816.84
Total for all 11 openings · product only, before tax, installation and permit
Waterfront estate (Gables Estates / Cocoplum / Gables by the Sea style)
A large bay- or canal-front home where the water side is mostly glass: three wide sliders, large fixed panes, wide rollers and bedroom single-hungs. Site-specific engineering for the widest openings, frame colors set by design review and installation are extra.
- 2 × Sliding glass door, 4 panels (OX-XO) 120" × 80"
- 1 × Sliding glass door (XO) 96" × 80"
- 4 × Fixed / picture window 60" × 60"
- 2 × Fixed / picture window 72" × 48"
- 6 × Horizontal roller (XO) 72" × 48"
- 4 × Single hung 36" × 60"
- ESW total (Verified)
- $28,452.16
- Mr. Glass total (Verified)
- $28,596.04
Total for all 19 openings · product only, before tax, installation and permit
Downtown / Ponce de Leon Boulevard condo unit
A unit in a 50-plus-unit building: one balcony slider, one fixed living-room pane and two bedroom rollers. Association color spec, building-height engineering and recertification-related work are outside the product price.
- 1 × Sliding glass door (XO) 72" × 80"
- 1 × Fixed / picture window 48" × 48"
- 2 × Horizontal roller (XO) 60" × 48"
- ESW total (Verified)
- $5,093.64
- Mr. Glass total (Verified)
- $5,243.90
Total for all 4 openings · product only, before tax, installation and permit
Unit prices used for Coral Gables
Per square foot of opening, the sizes priced for Coral Gables run $47 to $61 with ESW and $45 to $73 with Mr. Glass, product only. In these tables, within each window type, a smaller opening costs more per square foot than a larger one, so compare the row closest to your size.
| Opening | ESW (Verified) | Mr. Glass (Verified) | Per sq ft (ESW / Mr. Glass) | Your exact size |
|---|---|---|---|---|
Single hung 36" × 60" 1/8" laminated glass, both brands · ES-MX1000 / MG-350 | $773.75 | $761.76 | $52 / $51 | |
Single hung 24" × 36" 1/8" laminated glass, both brands · ES-MX1000 / MG-350 | $368.24 | $436.72 | $61 / $73 | |
Fixed / picture window 36" × 36" 3/16" laminated glass, both brands · ES-EL150 / MG-400 | $518.63 | $545.72 | $58 / $61 | |
Sliding glass door (XO) 72" × 80" 3/16" laminated glass, both brands · ES-MX4000 / MG-1500 | $2,276.59 | $2,504.66 | $57 / $63 | |
Single hung 36" × 48" 1/8" laminated glass, both brands · ES-MX1000 / MG-350 | $644.09 | $654.28 | $54 / $55 | |
Horizontal roller (XO) 60" × 36" 1/8" laminated glass, both brands · ES-MX2000 / MG-350 | $760.59 | $761.11 | $51 / $51 | |
Sliding glass door (XO) 96" × 80" 3/16" laminated glass, both brands · ES-MX4000 / MG-1500 | $2,845.30 | $3,060.38 | $53 / $57 | |
Sliding glass door, 4 panels (OX-XO) 120" × 80" 3/16" laminated glass, both brands · ES-MX4000 / MG-1500 | $3,945.22 | $4,302.63 | $59 / $65 | |
Fixed / picture window 60" × 60" 3/16" laminated glass, both brands · ES-EL150 / MG-400 | $1,321.20 | $1,244.03 | $53 / $50 | |
Fixed / picture window 72" × 48" 3/16" laminated glass, both brands · ES-EL150 / MG-400 | $1,275.43 | $1,210.86 | $53 / $50 | |
Horizontal roller (XO) 72" × 48" 1/8" laminated glass, both brands · ES-MX2000 / MG-350 | $1,130.96 | $1,080.92 | $47 / $45 | |
Fixed / picture window 48" × 48" 3/16" laminated glass, both brands · ES-EL150 / MG-400 | $874.17 | $861.70 | $55 / $54 | |
Horizontal roller (XO) 60" × 48" 1/8" laminated glass, both brands · ES-MX2000 / MG-350 | $971.44 | $938.77 | $49 / $47 |
Not your size? Open the ESW or Mr. Glass link on the closest row and change the width and height to see the verified price for your opening.
The products behind these prices
Each row compares the lowest-cost line of each brand that has the same laminated glass on both sides, so the price gap is the price gap, not thinner glass on one side.
| Type | ESW | Mr. Glass | Glass, both brands |
|---|---|---|---|
| Single hung | ES-MX1000 - SINGLE HUNG (OX) AAMA 2604 White | MG-350 Single Hung (EQUAL) White | 1/8" laminated clear |
| Fixed / picture window | ES-EL150 - FIXED WINDOW (O) AAMA 2604 White | MG-400 Picture Window (SQUARE) White | 3/16" laminated clear |
| Sliding glass door (XO) | ES-MX4000 - SLIDING GLASS DOOR (XO (2)) AAMA 2604 White | MG-1500 Sliding Glass Door (heavy) (XO) White | 3/16" laminated clear |
| Horizontal roller (XO) | ES-MX2000 - HORIZONTAL ROLLER (XO) 2604 Bone White | MG-350 Horizontal Roller (XO) White | 1/8" laminated clear |
| Sliding glass door, 4 panels (OX-XO) | ES-MX4000 - SLIDING GLASS DOOR (OX-XO (2)) AAMA 2604 White | MG-1500 Sliding Glass Door (heavy) (OXXO) White | 3/16" laminated clear |
In Coral Gables, design review comes before the price
Most South Florida cities ask one question about a replacement window: does it carry a valid approval? Coral Gables asks a second one first: does it fit the look of the house and the street? That question is answered by the Board of Architects, a city board of at least seven local architects appointed by the City Manager and approved by the City Commission. Its job is to keep the city's architecture consistent with its regulations and preserve its traditional aesthetics.
For a typical building permit, board review means a preliminary approval and a final approval before the permit is issued. The city's permit requirements call for electronic drawings approved by the board and stamped "BOA Approved Set For Reference Only" to be uploaded with the permit. The city's permit requirements list "Doors/Skylights/Windows/Storefronts" as their own permit type.
What that means for a price: the frame color, the grid pattern and the opening proportions you compare prices on should be the ones the board will accept. The tables below price white frames with clear laminated glass. If the board asks for a different finish or a divided-lite look, that option is quoted in writing. Board decisions can be appealed to the City Commission under Zoning Code Section 14-208, but an appeal is slow, so most owners price what fits the Design Review Standards in Section 5-100 from the start.
Three kinds of Coral Gables homes, three kinds of quotes
The city was incorporated on April 29, 1925, after George Merrick laid it out on about 3,000 acres of family citrus grove and pine land in the Mediterranean Revival style. Housing data shows that history. The median year built is about 1968, roughly 10% of homes date from before 1940, and about 41% were built in the 1940s through 1960s.
Census figures count 21,906 housing units and a 63.9% owner-occupied rate. About half of the units are single-family detached houses, only about 3% are attached townhouses, and about a quarter sit in buildings with 50 or more units.
So a Coral Gables quote is usually one of three jobs: a 1920s-1940s Mediterranean Revival house in Granada or the Country Club Section, a 1950s-1960s one-story house in the Riviera sections, or a condo unit downtown. Waterfront estates in Gables Estates, Cocoplum, Gables by the Sea, Deering Bay and Snapper Creek Lakes are a fourth, with much more glass per home. The scenarios below follow those four.
What the verified tables cover
Every price on this page comes from our factory pricing engine, the same one behind the online configurator, and was checked on November 19, 2026. Each one is labeled Verified. They are product-only visitor prices for ESW and Mr. Glass, before sales tax, installation, permit fees and delivery. PGT is quoted on request. A written quote confirms your final price.
See the unit price table above for the types and sizes we priced. Casement windows, arched tops and French doors, all common on Mediterranean Revival houses, are not in these tables and are quoted separately.
Whole-home scenarios for Coral Gables
Each scenario is priced line by line from the verified tables. Change the counts to match your openings. Pre-1950 houses in Coral Gables rarely have standard openings, and the Board of Architects reviews proportion, so most of these homes end up with a mix of table sizes and custom sizes quoted in writing.
None of the scenarios include design-review drawings, historic review, engineering for wide openings or installation. Those are listed in the quote-reading section below so you can see them on a competing quote too.
How to read a Coral Gables quote, and what is not in the tables
A per-opening number in Coral Gables can hide a lot. Ask for the quote by line, and check each line against this list.
- Product line per opening: type, width and height in inches, brand, frame finish and glass. The tables on this page are that line, and nothing else.
- Approval per product: the Miami-Dade NOA or Florida Product Approval number for each window and door. An NOA carries an approval date and an expiration date, so check that each approval is current before you file.
- Board of Architects package: preliminary and final review drawings, the stamped "BOA Approved Set", and any color or grid samples. This is a cost most cities do not have.
- Historic review, if the house is on the local register or in a designated district: a Special Certificate of Appropriateness and any conditions that come with it.
- Engineering: site-specific wind-load calculations for wide estate sliders, tall openings or buildings over a standard height.
- Installation, removal of old units, stucco and interior patching, and Florida sales tax and delivery.
- City of Coral Gables permit fees and inspections, filed through the Citizen Self Service portal.
- A wind mitigation inspection (form OIR-B1-1802), which can document opening protection for your insurer.
Historic homes: price the openings you have
Coral Gables keeps its own Register of Historic Places, and eleven of its resources are also on the National Register, one of them a National Historic Landmark. Under the city code, changes within a designated historic district require a Special Certificate of Appropriateness from the Historic Preservation Board, which handles exterior alterations, demolitions and landmark nominations.
The MacFarlane Homestead Historic District, bounded by Jefferson Street, Frow Avenue, Brooker Street and Grand Avenue, was locally designated in 1989 and listed on the National Register in 1994, the only National Register district in the city. Its 32 contributing houses are modest homes, not mansions. The same rules apply to a landmarked 1926 Mediterranean Revival house on a canal.
The city has cited a designated property for installing windows without permits or historic review. For pricing, the lesson is simple: price the openings as they are, expect custom sizes, and get the certificate before you order. A product priced from the tables that the board later rejects is money spent twice.
The 175 mph rule every Coral Gables window is priced against
Coral Gables is in Miami-Dade County, and the Florida Building Code defines the High-Velocity Hurricane Zone as Miami-Dade and Broward only. Under Section 1620.2, the design wind speed for homes in Miami-Dade (Risk Category II) is 175 mph. There is no lower code tier inside city limits, so every price in the tables is for an HVHZ-rated product.
The 8th Edition (2023) code applies to permit applications filed on or after December 31, 2023. Each window and door needs a current Florida product approval or Miami-Dade Notice of Acceptance for the exact model, glass and anchoring you are buying. That paperwork comes with the product, and the testing behind it is part of what you pay for.
Waterfront estates: more glass, more surge exposure
The city reaches Biscayne Bay through Gables by the Sea, Cocoplum, Gables Estates and Deering Bay, and a canal network runs along the Coral Gables Waterway. The city maps Storm Surge Planning Zones A through E, where a zone is any area that could see a surge of 1.5 feet or more in a hurricane; you can check your zone at coralgables.com/hurricane.
That exposure is not theory. After Hurricane Andrew on August 24, 1992, NOAA photographed the marina at Gables by the Sea following the surge, and the National Hurricane Center's report puts the highest still-water mark at 16.9 feet, at the Burger King headquarters next to the Deering Estate just south of the city.
On the price side, waterfront homes carry the widest openings in the city: 120-inch sliders, 60x60 fixed panes and 72x48 rollers facing the water. Compare the widest rows in the door and fixed tables, because that is where estate quotes are decided. Impact windows do not change your flood zone or your insurance flood rating.
Condo units and the recertification calendar
About a quarter of Coral Gables units are in buildings of 50 or more units, and the downtown towers span eras: a 16-story building from 1981 on East Ponce de Leon. Coral Gables applies Miami-Dade Code Section 8-11(f), which requires inspection of buildings in existence 40 years or longer, and the county's 2022 changes moved the first cycle to 30 years with 10-year intervals. Florida's milestone inspection law also covers condo and co-op buildings with three or more habitable stories.
Window and slider replacement often follows these inspections, and the association usually sets a frame color and style for the whole facade. Get that spec before you price, because a unit-level quote that does not match the building spec will not pass the board or the city.
From price to closed permit at Development Services
Permits are handled by the City of Coral Gables Development Services Department, Building Division, which runs permitting, Florida Building Code plan review and inspections. The city moved to fully digital processing with EnerGov permitting software and Bluebeam plan review.
- Clear design review. Submit the Board of Architects application for alterations with window and door drawings. Obtain preliminary and final approval, and the Special Certificate of Appropriateness if the property is designated.
- File in the Citizen Self Service portal. Upload the stamped BOA Approved Set, the NOA or Florida approval for each product and the opening schedule under one permit record. The city says most permits enter review within 2 to 3 business days after all documents are uploaded. Portal help: 305-460-5245.
- Answer reviewer comments. Comments appear under the Reviews section of the permit record. Status is available 24/7 by permit number.
- Install, then request inspections online. A contact listed on the permit logs in, opens the permit and requests each inspection from the inspection tab. Afterward, a wind mitigation inspection (OIR-B1-1802) can document the new opening protection for your insurer.
What the per-square-foot guides leave out, and how to order
The pages that rank for impact window cost in Coral Gables give installed ranges per square foot, per window or per whole house. A range like that does not show the price of an exact size for a named brand, or separate the product from installation and design review. That is why a Coral Gables owner comparing two quotes often cannot tell which one includes the review package.
This page does the opposite: product-only, size by size, two brands side by side, with the local steps listed so you can ask every bidder the same questions. Factory orders typically take 6–12 weeks depending on brand; in-stock units can be faster, and design review runs in parallel with the order.
To get a written quote for a Coral Gables address, send your opening list with widths and heights in inches, photos of the facade, your ZIP (33134, 33143, 33146 or 33156) and whether the home is designated historic or in a condo building, or call (754) 303-7130. The quote will list each product with its NOA or Florida approval number so your design-review and permit packages can be built from it.
In stock now for Coral Gables
Real units available for pickup in Miami-Dade County — reserve online, no payment required.
- Unknown Unspecified 70 1/2" × 45"$1,400.00
- Unknown Unspecified 25 5/8" × 45 3/8"$335.00
- Mr Glass Horizontal Roller 35 3/4" × 47 3/4"$561.75
- Mr Glass Horizontal Roller 26 1/4" × 38 1/8"$464.38
Coral Gables price questions
Does Board of Architects review change what I pay for impact windows in Coral Gables?
It can change which product you buy, not the table price of a given size. The board reviews windows and doors on alterations against the Design Review Standards, with preliminary and final approval before the permit. If it asks for a frame color or divided-lite look other than the white, clear-glass units in the tables, that option is quoted in writing. The review drawings themselves are a separate cost.
My Coral Gables house is on the local historic register. Can I use the table prices?
Use them as a starting point for openings that match a table size. Changes in a designated district need a Special Certificate of Appropriateness, which can carry design conditions. Pre-1950 Mediterranean Revival houses often have casements, arches and odd sizes that are quoted separately. Get the certificate before you order.
Are waterfront homes in Gables Estates or Cocoplum priced differently?
The product price per size is the same anywhere in the city. What changes is the mix: waterfront estates carry many more wide sliders and large fixed panes facing the bay or canals, so compare the 120x80 door row and the 60x60 fixed row first. Wide openings may also need site-specific engineering, which is outside the product price.
Do these Coral Gables prices include the city permit and inspections?
No. Every price is a Verified, product-only visitor price for ESW or Mr. Glass, checked on November 19, 2026. City of Coral Gables permit fees, Board of Architects drawings, historic review, engineering, installation, sales tax and delivery are extra. Permits are filed and inspections requested in the city's Citizen Self Service portal.
What approval does a window need to be permitted in Coral Gables?
Coral Gables is in Miami-Dade County, inside the HVHZ, with a 175 mph design wind speed for homes under Florida Building Code Section 1620.2. Each product needs a current Florida product approval or Miami-Dade Notice of Acceptance for the exact model and glass. An NOA shows an approval date and an expiration date, and the county can revoke it, so check the date on each one in your quote.
How long does a factory order take for a Coral Gables home?
Factory orders typically take 6–12 weeks depending on brand, and in-stock units can be faster. Because Board of Architects review needs preliminary and final approval before the permit, and the city says most permits enter review within 2 to 3 business days of a complete upload, the review package and the factory order usually run at the same time rather than one after the other.
Sources
- City of Coral Gables, Development Services, Board of Architects
- City of Coral Gables, Board of Architects Review Application (2025)
- City of Coral Gables, Permit Requirements for Development Services (04-04-2025)
- City of Coral Gables, Design Best Practices (2024)
- City of Coral Gables, Development Services FAQ (Citizen Self Service portal)
- City of Coral Gables, Development Services FY24 Accomplishments
- City of Coral Gables, Building Division, Building Recertification
- City of Coral Gables, Hurricane guidance (Storm Surge Planning Zones)
- Coral Gables Code of Ordinances, Chapter 8 Historic Preservation (Zoneomics)
- City of Coral Gables, Nationally Recognized Historic Resources (2015)
- MacFarlane Homestead Historic District (Wikipedia)
- Gables Gazette, Board of Architects and Code Enforcement coverage
- Historic Preservation Board actions, Alhambra Circle COAs (Citizen Portal summary)
- U.S. Census Bureau QuickFacts, Coral Gables city, Florida
- City-Stats, Coral Gables housing (ACS 2023)
- NeighborhoodScout, Coral Gables real estate (ACS-based age of housing)
- Point2Homes, Coral Gables demographics (units in structure)
- Zip-Codes.com, Coral Gables ZIP codes
- Homes.com, Coral Gables neighborhoods
- Florida Building Code wind speeds (PGT Florida Building Code resource)
- Florida Building Code overview (Wikipedia)
- Charlotte County, 8th Edition Florida Building Code effective date
- Miami-Dade County Product Control, Notice of Acceptance example
- Miami-Dade County, 40-year recertification program
- Florida Statutes s. 553.899 (milestone inspections)
- NOAA Photo Library, Hurricane Andrew (Gables by the Sea marina, Deering Estate)
- Hurricane Science, Hurricane Andrew 1992
- Million Luxury, flood zones for Coral Gables waterfront estates
- George E. Merrick (Wikipedia)
- Apartments.com, 911 E Ponce de Leon Blvd building page
- City of Coral Gables - Permit Requirements (Apr 2025)
- Census Reporter - Coral Gables, FL (ACS 2024)
Price your Coral Gables openings
Enter your sizes for an instant factory price, or send them for a written quote.